DAGDARION III folding knife handmade by master ANDROSHCHUK KNIVES, steel - CPM® S90V™ 64 HRC)
- Brand: Майстерня ножів ANDROSHCHUK KNIVES
- Product Code: DAGDARION ІІІ - ніж ручної роботи ANDROSHCHUK KNIVES
| Загальна довжина клинка mm: | 270±05 mm |
| Матеріал леза | Blade - CPM® S90V™ steel - high-chromium, high-vanadium, corrosion-resistant powder steel produced by the "Crucible Industries" concern (USA). |
| Твердість клинка (метал): | Hardness - 64 HRC |
| Матеріал руків'я: | Oxidized titanium frame, ceramic bearing, N690 hardened steel liner, shims, spacer, timaskus (titanium damascus) clip. Pads - carbon. In the axial assembly - ceramic bearings, the detector ball - ceramic, hardened nuts made of N690 steel, in the lock there is a hardened nut with a ceramic detent ball. |
| Довжина леза | 115±05 mm |
- Availability: Під замовлення
Available Options
Description
SPECIFICATIONS:
The name of the knife: DAGDARION III folding knife handmade by master ANDROSHCHUK KNIVES, steel - CPM® S90V™ 64 HRC)
Knife type: A folding knife
Brand: Studio of exclusive handmade knives ANDROSHCHUK KNIVES
Engraving of the steel mark and logo after paying for the knife, the customer can express his desire to apply his inscription
Steel brand: Blade - CPM® S90V™ steel - high-chromium, high-vanadium, corrosion-resistant powder steel produced by the "Crucible Industries" concern (USA).
Steel sheet: The blade folds into a handle
Blade Sharpening Angle: Sharpened at 36 degrees, the cut is very aggressive for a confident shave
Descents: Direct
Taper: 0.2mm
Blade hardness: 64 HRC
Total length: 270 mm
Blade length: 115mm
Blade width: 34 mm
Blade thickness: 3.2 mm
Length of the handle: 155 mm
Handle thickness: 17mm with clip, 12mm without clip
Total weight: 230
Grinding of the blade: Finish - mirror polishing
Handle material: Oxidized titanium frame, ceramic bearing, N690 hardened steel liner, shims, spacer, timaskus (titanium damascus) clip. Pads - carbon. In the axial assembly - ceramic bearings, the detector ball - ceramic, hardened nuts made of N690 steel, in the lock there is a hardened nut with a ceramic detent ball.
Handle color: Titanium
Handle Impregnation: None
Handle cover: None
Hole for a shoelace (for a lanyard): Absent
Temlyak - Absent
Scabbards: 4.0 mm natural calfskin (Italy), treated with appretura to protect against water and impregnated with protective solutions, fat wax impregnation, stitched with waxed thread. Manual embossing of the invoice. Finish (Apretto) with apretura. The hanger is removable
Model: DAGDARION III folding knife handmade by master ANDROSHCHUK KNIVES, steel - CPM® S90V™ 64 HRC)
Model number: 064
Country of birth: Ukraine
Craftsman: Master Grigory Androshchuk (Androshchuk Knives), m.Vinnytsia, Ukraine Studio of exclusive handmade knives ANDROSHCHUK KNIVES
Best use: Multi-purpose: hunting, fishing, cutting, slicing, etc
Knife condition: new
The price is indicated with the sheath.
A sharpened knife is not a cold weapon.
Our knives are very sharp, so open and use very carefully. We are not responsible for injuries related to the use of our knives.
Our products are intended for legal use only by responsible buyers. We will not sell our products to anyone under the age of 18.
Availability changes regularly, upon confirmation of your order, we will inform you about the availability or when the product will be ready. The product may differ slightly from the one shown in the photo.
Steel CPM S90V. Composition and properties.
Steel grade CPM S90V - stainless tool powder steel made in the USA. First introduced in 1999 by Crucible Industries. Good, fairly strong and wear-resistant steel with a hardness of 56-59 HRC. The content of carbides is about 22% (see information below). The basis for it was 420 steel with the addition of a large amount of vanadium and an increase in carbon levels. There is conflicting information about the cutting properties of CPM S90V - someone (probably sellers) praises, and someone says that with such hardness you can look at simpler steels. I will not argue here - you can always look, but CPM S90V offers a significant improvement in wear resistance compared to the simpler 440C and D2, with corrosion resistance equal to or better than 440C. The high vanadium content of S90V promotes the formation of harder vanadium carbides than chromium carbides, leaving more free chromium for corrosion resistance. When sharpening the CPM S90V, it makes sense to give preference to diamonds, CBN or silicon carbide stones. When using natural whetstones in the finish, I would look at the sides of not too hard stones.
Related Products
Delivery and payment
Delivery and payment
Delivery by Nova Poshta
The speed of delivery to any branch of Nova Poshta in Ukraine is fixed by the operator, but usually does not exceed 1-3 calendar days.
In cash
Cash payment upon receipt of goods.
Cash on delivery at Nova Poshta (you must have a passport or driver's license with you).
Visa and MasterCard
Payment of the order to a Privat Bank card.
Delivery of goods is possible only after confirmation of payment.