Exclusive handmade knives No. 1 in Ukraine
Every day, 24/7
No days off
BEAR CLAW II exclusive handmade knife by PAVL GONCHARENKA, order to buy in Ukraine (CPM® 121rex™ high-carbon monster blade in stainless steel laminate 95x18, 67-68 HRC)
BEAR CLAW II exclusive handmade knife by PAVL GONCHARENKA, order to buy in Ukraine (CPM® 121rex™ high-carbon monster blade in stainless steel laminate 95x18, 67-68 HRC)
BEAR CLAW II exclusive handmade knife by PAVL GONCHARENKA, order to buy in Ukraine (CPM® 121rex™ high-carbon monster blade in stainless steel laminate 95x18, 67-68 HRC)
BEAR CLAW II exclusive handmade knife by PAVL GONCHARENKA, order to buy in Ukraine (CPM® 121rex™ high-carbon monster blade in stainless steel laminate 95x18, 67-68 HRC)
BEAR CLAW II exclusive handmade knife by PAVL GONCHARENKA, order to buy in Ukraine (CPM® 121rex™ high-carbon monster blade in stainless steel laminate 95x18, 67-68 HRC)
BEAR CLAW II exclusive handmade knife by PAVL GONCHARENKA, order to buy in Ukraine (CPM® 121rex™ high-carbon monster blade in stainless steel laminate 95x18, 67-68 HRC)
BEAR CLAW II exclusive handmade knife by PAVL GONCHARENKA, order to buy in Ukraine (CPM® 121rex™ high-carbon monster blade in stainless steel laminate 95x18, 67-68 HRC)
BEAR CLAW II exclusive handmade knife by PAVL GONCHARENKA, order to buy in Ukraine (CPM® 121rex™ high-carbon monster blade in stainless steel laminate 95x18, 67-68 HRC)
BEAR CLAW II exclusive handmade knife by PAVL GONCHARENKA, order to buy in Ukraine (CPM® 121rex™ high-carbon monster blade in stainless steel laminate 95x18, 67-68 HRC)
BEAR CLAW II exclusive handmade knife by PAVL GONCHARENKA, order to buy in Ukraine (CPM® 121rex™ high-carbon monster blade in stainless steel laminate 95x18, 67-68 HRC)
BEAR CLAW II exclusive handmade knife by PAVL GONCHARENKA, order to buy in Ukraine (CPM® 121rex™ high-carbon monster blade in stainless steel laminate 95x18, 67-68 HRC)
BEAR CLAW II exclusive handmade knife by PAVL GONCHARENKA, order to buy in Ukraine (CPM® 121rex™ high-carbon monster blade in stainless steel laminate 95x18, 67-68 HRC)
BEAR CLAW II exclusive handmade knife by PAVL GONCHARENKA, order to buy in Ukraine (CPM® 121rex™ high-carbon monster blade in stainless steel laminate 95x18, 67-68 HRC)

BEAR CLAW II exclusive handmade knife by PAVL GONCHARENKA, order to buy in Ukraine (CPM® 121rex™ high-carbon monster blade in stainless steel laminate 95x18, 67-68 HRC)

Загальна довжина клинка mm: 280±05 mm
Матеріал леза Blade - CPM REX 121 steel in stainless Damascus lining - tool powder fast-cutting alloy of the American company Crucible Industries LLC
Твердість клинка (метал): Hardness - 67-68 HRC
Матеріал руків'я: Bronze, g10, amber in acrylic, stabilized mammoth tooth, stabilized Caucasian walnut, mosaic tube. Strap made of leather cord 3 mm. The bead is a brown bear claw with fur elements.
Довжина леза 145±05 mm
  • Availability: In Stock
23,000.00 грн.

Available Options

Order in 1 click
We will call you back and clarify the details
Sheath

Description

SPECIFICATIONS:

The name of the knife is BEAR CLAW II exclusive handmade knife by PAVL GONCHARENKA, order to buy in Ukraine (CPM® 121rex™ high-carbon monster blade in stainless steel laminate 95x18, 67-68 HRC)
Knife type: Fixed blade
Brand: Pavlo Honcharenko's Handmade Knives Studio


Steel brand: Blade - CPM REX 121 steel in stainless Damascus lining - tool powder fast-cutting alloy of the American company Crucible Industries LLC
Steel sheet: One-piece, flush mounting on screed and resin
Blade sharpening angle: Sharpened at 36 degrees
Descents: Direct
Reduction: 0.2 mm
Blade hardness: 67-68 HRC
Total length: 280 mm
Blade length: 145 mm
Blade width: 32 mm
Blade thickness: 3.8 mm
Length of the handle: 135 mm
Handle thickness: 32 mm
Total weight: 370 gr
Grinding of the blade: Finish - manual satin 600 grit
Bolster material (guard): Bronze
Handle material: Bronze, g10, amber in acrylic, stabilized mammoth tooth, stabilized Caucasian walnut, mosaic tube. Strap made of leather cord 3 mm. The bead is a brown bear claw with fur elements.
Handle color: Brown
Impregnation of the handle: Yes
Handle cover: Yes
Hole for a shoelace (for a lanyard): Yes
Lanyard: Lanyard made of 3 mm leather cord. The bead is a brown bear claw with fur elements
Sheath: American walnut, wood carving (Scandinavian elm). 4.0 mm genuine calfskin leather (Italy), treated with appretura to protect against water and impregnated with protective solutions, fat-wax impregnation, stitched with waxed thread. Manual embossing of the invoice. Artistic decoration of vaginas. Finish (Apretto) with apretura. The pendant is removable, the suction cup is made of amber in acrylic. The bead is amber


Model: BEAR CLAW II exclusive handmade knife by PAVL GONCHARENKA, order to buy in Ukraine (CPM® 121rex™ high-carbon monster blade in stainless steel laminate 95x18, 67-68 HRC)
Model number: 126
Country of birth: Ukraine
Artisan: Master Pavlo Honcharenko, Ivankiv, Ukraine Pavlo Honcharenko studio of handmade knives
Best Use: Multi-purpose: Hunting, Fishing, Tourism, Household, Carcass Splitting, Slicing, etc.
Knife condition: new
The price is indicated with the sheath.

 


A sharpened knife is not a cold weapon.

Our knives are very sharp, so open and use very carefully. We are not responsible for injuries related to the use of our knives.
Our products are intended for legal use only by responsible buyers. We will not sell our products to anyone under the age of 18.


Availability changes regularly, upon confirmation of your order, we will inform you about the availability or when the product will be ready. The product may differ slightly from the one shown in the photo.


Powdered steel Crucible CPM® S125V™


CPM® S125V™ is a high-alloy martensitic stainless tool steel manufactured by Crucible Industries (USA). The corrosion resistance of the alloy is comparable to ZDP-189, that is, it is quite high. Steel ZDP-189 contains 20% chromium versus 14% for CPM S125V. The amount of carbon is about the same. It would seem that 125ya should rust more, but in ZDP-189 much more chromium goes into carbides than in S125V, where vanadium also goes into carbides. As a result, the chromium content in the solid solution for both steels is not so different.

Recently, many knife manufacturers have abandoned the CPM S125V, primarily due to the complexity of the finish. Custom craftsman Phil Wilson (Phil Wilson) said that handmade satin S125V takes three times longer than for CPM 10V - one of the most difficult steels (more or less mass-produced).

The steel is made using the technology of amorphous metal alloys, better known among knife makers and hobbyists under the acronym CPM (Crucible Particle Metallurgy). The CPM process makes it possible to produce a very uniform, high quality steel that is characterized by superior stability, uniformity and toughness compared to steels from traditional heat production.

Powdered high speed steel was developed in Sweden in the late 60s of the last century. The powder metallurgy method makes it possible to introduce more alloying elements into the steel without reducing the strength and machinability.

Powder steel, unlike ordinary steel, is fed in molten form through a special nozzle through a stream of liquid nitrogen. Steel quickly hardens into small particles. The result is a powder with a uniform arrangement of carbides (the place of accumulation of carbides is the place where cracks originate). Carbides perform the same function in the composition of steel as cobblestones on the street: they (carbides) are harder than the steel surrounding them, and contribute to its increase in wear resistance.

The resulting powder is sieved and placed in a steel container in which a vacuum is created. Next, the contents of the container are sintered at high temperature and pressure - thus achieving material homogeneity. This process is called hot isostatic pressing. The steel is then pressure treated. The result is a high speed steel with very small carbide particles evenly distributed in the steel substrate. The resulting steel can be rolled in the traditional way, as well as serial grades of steel, resulting in its increased strength.

Differences in the wear resistance of different grades of powder steel are explained by the presence of different carbides in their composition in different proportions and with different distribution uniformity throughout the steel volume. Of two steels having approximately the same hardness, the more wear-resistant will be the one in which there are more carbides or they are harder.

Steel composition:

C 3.3% - the carbon content in the alloy is 3.3%. Carbon is the most important element in steel, it increases its strength and gives the metal good hardness.

Cr 14.0% - the chromium content in the alloy is 14.0%. Chromium is a greyish-white lustrous hard metal. Chromium affects the ability of steel to harden, gives the alloy anti-corrosion properties and increases its wear resistance. Contained in stainless steel of any brand.

Mo 2.5% - the molybdenum content in the alloy is 2.5%. Molybdenum is a silvery white metal. Molybdenum is a hard-melting element, it prevents brittleness and brittleness of the blade, giving it the necessary rigidity, making it sufficiently resistant to high temperatures.

V 12.0% - the content of vanadium in the alloy is 12.0%. Vanadium is a grayish-white lustrous metal with great hardness. It is responsible for elasticity and enhances the properties of chromium, makes the metal inert to aggressive chemical environments.


The Knife.net.ua online store offers handmade knives, exclusive custom-made knives for discerning men and hunters, made by the hands of the best masters of Ukraine for use in hunting, in non-standard situations, at a favorable price to order or to choose from in our store. A quality tool for individual use in the field or hunting. Delivery is carried out throughout Ukraine within a few days. Knife.net.ua is the best selection of knives in Ukraine from handmade craftsmen.


Well, you can buy a knife made of powder steel Crucible CPM® Rex® 121® on our website knife.net.ua or by contacting us by phone +380961711010

It is worth remembering that when using a knife for its intended purpose and with careful handling, the knife will serve you for a very, very long time.


G10 — in Pavel Honcharenko's handmade knives: quality, style, modernity
What kind of material is this?

G10 is a light and hard material characterized by a textured surface and special practicality. It is used to create handles on various types of knives - complex and integral, with additional elements.

The basis is a compound reinforced under pressure with fiberglass. The fibrous structure gives the material rigidity. In order to increase the important operational characteristics during the manufacture of handles, special strengthening chemical compounds are additionally added to the composition. The material is non-combustible, has higher strength characteristics - for bending, tearing and impact.

G10 is formed in layers. This allows you to paint the overlay in one or more colors, creating interesting visual effects of the product's multi-layering. Outwardly, it resembles micarta - another popular material from which the sheaths of RoS handmade knives are made.

Features of the production of overlays with G10
Most manufacturers subject finished G10 pads to sandblasting, which exposes the structure of the fiberglass. As a result, the handle acquires a rough surface, which prevents slipping in the hand and ensures comfortable and safe use of knives. After the finishing treatment, the surface of the pad may become dull. To restore a bright, spectacular appearance at the last stage of production, it is covered with oil or polished.

The craftsman uses G10 handle pads with various knife steels - ATS 34, CPM154CM, D2, 440C, CPM S30V, 40X13.

Advantages of the material
This modern material has the following advantages:

  • easily withstands flexibility and stretching loads;
  • has resistance to shock loads;
  • does not absorb moisture;
  • differs in high density;
  • resistant to radiation and chemicals;
  • has low electrical conductivity;
  • does not dry out and does not deform;
  • resistant to high temperatures.

Another advantage of this material is an excellent ratio of mechanical strength and light weight. This makes it possible to obtain strong linings with good operational characteristics that do not burden the knives.

High-quality and original inserts made of G10 became a wonderful decoration of exclusive and unique Studio knives Pavlo Honcharenko's Handmade Knives Studio (Ukraine), which offers to order and buy online store https://knife.net.ua


Maple burl

Cap - tsenarist on a stovburi tree, vіn maє znachno schіlnіshu structure with an absolutely unique little zrіzu.

The burl is blown by a high mity, the wood of the burl burns badly, it is well treated and polished.

Razmіri blanks approximately 135-45-30 mm.

Bars of stabilized wood are miraculously suitable for folding standard knife handles from open-cut and mounted mounting.
Also, the stabilization of the maple burl is suitable for cutting, making miniatures, embellishment, as well as various pendants, amulets, toys and virobiv.
With a stabilized burl of maple, hand-practice as a confirmation of maistras, and as a cob.
The wood was stabilized, whether it was a color or straight, equal bars of a spravzhny tree - maple burl, seeped through by a special warehouse.
Zasіb for the stabilization of the tree, I will fill in all the dry porosity, why should the trees come out of the tree all the same, turning it into a polymerized bar of stabilized Karelian birch, only with improved authorities.

Stabilized tree is more important and richer. It does not succumb to vlogs, does not change its color for sleepy promises, being overlaid with richly valuable and superior material.
Everything is to be stabilized with an ideal material for the creation of objects that are suitable for all physical and climatic trends - knife handles, rіztsіv and other tools.

Maple burl stabilization miraculously polished, giving a smooth surface, like a stone. Without coating in a dry, stabilized look, the bars may have a bleak look, and under the finishing warehouses, their clear, bright texture is revealed.

For the unique beauty of the cap, they call it wooden malachite!

Zagalom - what is the smallest baby and the greater expansion of the burl, Tim wine is dear.

About the value of this unique material to speak of a historical fact, indications from the book "Kapova Skrinka" (author Nadiya Perminova): thoroughbred bik at the selskogospodarsky exhibition.

Today, on the world market, the price for burl wood (massive and veneer) has changed the price for be-yak, inshu, including: oak, elm, mountain, red wood, be it exotic breed.

UNIKALNE POLYSTANNY of power of the MATERIALAL, the intended vault of the Kapov Malyunka in the skin of the Viru, Rreshtiy, I was in the vale of the ecstatic nature of the vibrovin.

 

 

 

Related Products

Delivery and payment

Delivery and payment
Delivery by Nova Poshta
The speed of delivery to any branch of Nova Poshta in Ukraine is fixed by the operator, but usually does not exceed 1-3 calendar days.

In cash
Cash payment upon receipt of goods.
Cash on delivery at Nova Poshta (you must have a passport or driver's license with you).

Visa and MasterCard
Payment of the order to a Privat Bank card.
Delivery of goods is possible only after confirmation of payment.

Reviews (0)

Write a review

Note: HTML is not translated!
    Bad 
 Good