HUTSUL hand-made ax by master Serhiy Dytyuk, steel - high carbon 54 - 58 HRC
- Brand: Майстерня сокир та шабель Сергія Дитюка
- Product Code: ГУЦУЛ - сокира ручної роботи СЕРГІЯ ДИТЮКА
| Загальна довжина клинка mm: | 140 мм +- 5 mm |
| Матеріал леза | High carbon steel |
| Твердість клинка (метал): | Hardness - 54 - 58 HRC |
| Матеріал руків'я: | Dried ash. (If you wish, you can make a handle of similar hard rocks; ash or oak). |
| Довжина леза | 80 +- 5 mm |
- Availability: Під замовлення
Description
SPECIFICATIONS:
The name of the ax is GUTSUL exclusive hand-made ax by master Serhiy Dytyuk, buy order in Ukraine (Steel - high carbon)
Ax type: Handle
Brand: Studio of exclusive hand-made axes SERGIA DITYUKA
Complete set: (Behind the zamovnik's bazhanny)
VIP case made of hard wood, covered with furboy and additional firm varnish: 4200 UAH
The box is standard, singed from pine: 2300 UAH
Subscription for juice: 1500 UAH
Blade shape: Rounded
Ax head material: carbon steel hardened 54 - 58 HRC
Processing: grinding, polishing, firing
Blade sharpening angle: 30-35 degrees
Grinding of the blade: Finish - grinding before etching with 600 grain, after etching - with 1000 m grain.
Blade length: 80 +- 5 mm
Length from the butt of the ax to the cutting edge: 140 mm +- 5 mm
The thickness of the shoe: 25 mm +- 2 mm
Head weight: 520 +-30 grams
Total Weight: 1050 +- 30 grams
Length of the handle: 950 +-100 mm (selected according to height)
Total length: 900 - 1200 mm
Handle material: Dried ash. (If you wish, you can make a handle of similar hard rocks; peas or acacia).
Cover: Italian vegetable-tanned genuine leather, 3-3.5 mm thick, stitched with waxed thread. Manual embossing of the invoice or inscription (possible upon request from your drawing).
Copper plated tool: No
Rubberized grip: No
Ax type: Universal
Additional characteristics:
Anti-friction coating of the blade
MASTER'S COMMENTS:
"Dear customers, we draw your attention to the fact that all products are made purely by hand and have a unique individual character. That is, the appearance of the product (shade and structure of wood, depth of metal etching, leather texture, etc.) may differ slightly from the photo, but in general the product will be as close as possible to the photo in the product card. Thank you for your understanding!
"By the way, you can order any inscription of your choice both on the leather cover and on the ax log itself to make the ax unique! All this can be discussed during the order! Call or write - always happy to help!
Drawings are applied to the blade by the method of etching in a chlorine gland. There is also wood carving, everything is done by hand, without lasers and CNC!"
Welcome all friends. I have been making metal products for a while now. In particular, the soul lies with hand-made axes and knives. All works can be seen on my website section
The ax has long been considered a symbol of strength and the desire for power, a hand-made ax is especially highly valued. It will be a great gift for your husband, friend or brother who is fond of hiking, hunting or fishing, etc.
Model: GUTSUL exclusive hand-made ax by master Serhiy Dytyuk, buy order in Ukraine (Steel - high carbon)
Model number: 016
Country of birth: Ukraine
Country of brand registration: Ukraine
Craftsman: Master Sergiy Dityuk, Dnipro, Ukraine, Studio of exclusive hand-made axes SERGIA DITYUKA
Best Use: Multi-functional: Hunting, Fishing, Carcass Splitting, Firewood Chopping, Area Cleaning, etc.
A sharpened ax is not a melee weapon.
Our axes are very sharp, so be very careful when opening and using them. We are not responsible for any injuries resulting from the use of our axes.
Our products are intended for legal use only by responsible buyers. We will not sell our products to anyone under the age of 18.
Availability changes regularly, after confirming your order we will notify you of availability or when the item is ready. The product may differ slightly from the one shown in the photo.
Steel 65G - structural spring-spring
Steel 65G is used in mechanical engineering and the production of various metal structures, for example, for the manufacture of car parts, rail fasteners, gears, gears, springs and other parts that are subjected to heavy loads. It can also be used to make tools such as drills, cutters, knives, etc.
65G steel can be quenched and tempered to increase its strength and hardness, but this can reduce its ductility and toughness. Therefore, the choice of heat treatment method depends on the requirements for the final product.
Grade 65G - application
Structural spring steel 65G is used for the manufacture of parts with increased wear resistance, operating without shock loads:
- springs,
- springs,
- feeding / clamping collets,
- bearing housings,
- flange,
- gears,
- friction discs,
- brake bands,
- thrust washers.
- Specific weight: 7850 kg/m3.
- Heat treatment: Delivery condition.
- Material hardness: HB 10 -1 = 241 MPa.
- Temperature of critical points: Ac1 = 721 , Ac3 (Acm) = 745 , Ar3 (Arcm) = 720 , Ar1 = 670 , Mn = 270.
- Forging temperature, °С: beginning 1250, end 780-760. Cooling of workpieces with a cross section of up to 100 mm is carried out in air, cross sections of 101-300 mm in a trough.
- Machinability: in the hardened and tempered state at HB 240 and σv=820 MPa, K υ solid. cpl=0.85 and Kυ b.st=0.80.
- Weldability of the material: not applicable for welded structures. KTS - no restrictions.
- Floken sensitivity: not sensitive.
- Tendency to temper brittleness: prone to Mn≥1%
|
Rolled metal from steel 65G The first supplier of metal. Low wholesale and retail prices. Choice advice. Placing an order on the website and in the office. Cut to size. Delivery across Belarus, including weekends. ORDER RENTAL 65G |
Steel 65G - domestic analogues
| Rolled metal brand | Substitute |
| 65G | 50 KFA |
| 55C2 | |
| 60C2 | |
| 60S2A | |
| 70 | |
| 70 G | |
| 9XC | |
| U8A |
Material 65G - characteristics
| brand | Classification | Delivery type | GOST | Foreign analogues |
| 65G | Structural spring-spring steel | Long products | 14959–79 | There is |
| Ribbon | 2283–79 | |||
| 2284–79 | ||||
| Wire | 9389–75 | |||
| Sheet | 1577–93 |
Grade 65G - technological features
Forging
| Type of semi-finished product | t, °С | Cooling | |
| Section size | Conditions | ||
| mm | |||
| Ingot | 1200–800 | up to 300 | In the oven |
| blank | 1250–780 | up to 100 | On air |
| 101–300 | in the trough | ||
Welding
Weldability - not applicable for welded structures.
Floken sensitivity - little sensitive.
cutting
| Initial data | Machinability Κυ | |||
| State | HB, MPa | σΒ, MPa | hard alloy | high speed steel |
| hardened tempered | 240 | 840 | 0.85 | 0.8 |
Tendency to temper brittleness
When the content of Mn ≥1% inclined.
Chemical composition in% steel 65G
| C | Carbon | 0.62 - 0.7 |
| And | Silicon | 0.17 - 0.37 |
| Mn | Manganese | 0.9 - 1.2 |
| In | Nickel | up to 0.25 |
| S | Sulfur | up to 0.035 |
| P | Phosphorus | up to 0.035 |
| Cr | Chromium | up to 0.25 |
| With | Copper | up to 0.2 |
| Fe | Iron | ~97 |
Physical properties of steel 65G
| t | r | R 109 | And 10-5 | l | a 106 | C |
| °С | kg/m3 | Ohm m | MPa | W/(m deg) | 1/City | J/ (kg deg) |
| 20 | 7850 | 2.15 | 37 | |||
| 100 | 7830 | 2.13 | 36 | 11.8 | 490 | |
| 200 | 7800 | 2.07 | 35 | 12.6 | 510 | |
| 300 | 2 | 34 | 13.2 | 525 | ||
| 400 | 7730 | 1.8 | 32 | 13.6 | 560 | |
| 500 | 1.7 | 31 | 14.1 | 575 | ||
| 600 | 1.54 | thirty | 14.6 | 590 | ||
| 700 | 1.36 | 29 | 14.5 | 625 | ||
| 800 | 1.28 | 28 | 11.8 | 705 |
| T (Town) | E 10-5 (MPa) | a 10 6 (1/City) | l (W/(m deg)) | r (kg/m3) | C (J/(kg deg)) | R 10 9 (Ом·м) |
| 20 | 2.15 | 37 | 7850 | |||
| 100 | 2.13 | 11.8 | 36 | 7830 | 490 | |
| 200 | 2.07 | 12.6 | 35 | 7800 | 510 | |
| 300 | 2 | 13.2 | 34 | 525 | ||
| 400 | 1.8 | 13.6 | 32 | 7730 | 560 | |
| 500 | 1.7 | 14.1 | 31 | 575 | ||
| 600 | 1.54 | 14.6 | thirty | 590 | ||
| 700 | 1.36 | 14.5 | 29 | 625 | ||
| 800 | 1.28 | 11.8 | 28 | 705 |
| R | Ohm m | Resistivity |
| r | kg/m3 | Density |
| C | J/(kg deg) | Specific heat |
| l | W/(m deg) | Coefficient of thermal conductivity |
| a | 1/City | Linear expansion coefficient |
| AND | MPa | Elastic modulus |
| t | °С | Temperature |
Steel 65G - exact and closest foreign analogues
| England | Bulgaria | Germany | China | Poland | USA |
| BS | BDS | DIN, WNr | GB | PN | - |
| 080A67 | 65g | 66Mn4 Ck67 | 65Mn | 65g | 1066 1566 G15660 |
Mechanical properties of steel 65G
| Assortment | GOST | Dimensions - thickness, diameter | Heat treatment mode | t | KCU | p | d5 | σT | St |
| mm | 0S | kJ/m2 | % | % | MPa | MPa | |||
| rental | 14959–79 | hardening | thirty | 8 | 785 | 980 | |||
| Vacation | |||||||||
| The sheet is thick | 1577–93 | 12 | 740 | ||||||
| Tape cold-worked | 2283–79 | 740–1180 | |||||||
| fire | 10–15 | 640–740 |
Hardness, MPa
| Assortment | GOST | HB 10-1 |
| Rolled products without heat treatment | 14959–79 | 285 |
| heat treated | 241 | |
| Sheet thick after annealing | 1577–93 | 229 |
Temperature of critical points, °C
| Critical points | Ac1 | Ac3 | Ar1 | Ar3 | Mn |
| Temperature | 721 | 745 | 670 | 720 | 270 |
Impact strength, J/cm2
| Heat treatment modes | t | KCU at temperatures | ||||||
| °С | -80 °C | -70 °C | -40 °С | -30 °C | -20 °С | 0 °C | +20 °С | |
| hardening | 830 | 12 | 24 | 27 | 69 | 110 | ||
| Vacation | 480 | |||||||
Endurance limit, MPa
| heat treatment | t−1 | σ−1 | |
| Mode | t, °С | ||
| Tempering (oil) | 810 | 431 | 725 |
| Vacation | 400 | ||
| Tempering (oil) | 810 | 284 | 480 |
| Vacation | 500 | ||
| GOST | Delivery condition, heat treatment mode | Section, mm | σ 0.2 (MPa) | σv(MPa) | d5 (%) | ψ % | HRC, no more |
| GOST 14959-79 | Steel categories: 3, 3A, 3B, 3B, 3G, 4, 4A, 4B. Hardening 830 °C, oil. Holiday 470 °С | Samples | 785 | 980 | 8 | thirty | - |
| GOST 1577-93 | Sheets normalized and hot-rolled Hardening 800-820 °C, oil. Tempering 340-380°C, air Hardening 790-820°C, oil. Vacation 550-580 °C, air |
80 20 60 |
-1220 690 |
730 1470 880 |
12 5 8 |
-10 30 |
-44-49 30-35 |
Mechanical properties of steel 65G depending on tempering temperature
| Vacation temperature, ° С | σ0.2 (MPa) | σv(MPa) | d5 (%) | ψ % | KCU (J/cm2) | HRC |
| Hardening 830 °C, oil | ||||||
| 200 400 600 |
1790 1450 850 |
2200 1670 880 |
4 8 15 |
30 48 51 |
5 29 76 |
61 46 30 |
Mechanical properties of steel 65G at elevated temperatures
| Test temperature, °C | σ 0.2 (MPa) | σv(MPa) | d5 (%) | ψ % |
| Hardening 830 °C, oil. Holiday 350 °C | ||||
| 200 300 400 |
1370 1220 980 |
1670 1370 1000 |
15 19 20 |
44 52 70 |
Impact strength of steel 65G KCU, (J/cm2)
| Т= +20 °С | T=0 | Т= -20 °С | Т= -30 °С | Т= -70 °С | heat treatment |
| 110 | 69 | 27 | 23 | 12 | Hardening 830 °C. Holiday 480 °С |
Endurance limit of steel 65G
| σ-1, MPA | J-1, MPA | n | Condition or heat treatment |
| 725 480 578 647 725 |
431 284 - - - |
106 | Hardening 810 °C, oil. Tempering 400 °C Hardening 810 °C, oil. Tempering 500 °C σ0.2=1220 MPa, σt=1470 MPa, HB 393-454 σ0.2=1280 MPa, σt=1420 MPa, HB 420 σ0.2=1440 MPa, σt=1690 MPa, HB 450 |
Hardenability of steel 65G
| Distance from the end, mm | Note | |||||||||
| 1.5 | 3 | 4.5 | 6 | 9 | 12 | 15 | 18 | 27 | 39 | Hardening 800 °С |
| 58.5-66 | 56.5-65 | 53-64 | 49.5-62.5 | 41.5-56 | 38.5-51.5 | 35.5-50.5 | 34.5-49.5 | 35-47.5 | 31-45 | Hardness for hardenability bands, HRC |
| Quantity of martensite, % | Critical hardness, HRC | Critical diameter in water | Critical diameter in oil |
| 50 90 |
52-54 59-61 |
30-57 Do 38 |
10-31 to 16 |
| HRC | HB | KCU | p | d5 | σT | St |
| MPa | kJ / m2 | % | % | MPa | MPa | |
| Rockwell hardness | Brinell hardness | impact strength | Relative contraction | Elongation at break | Yield strength | Ultimate strength |
| Mrs | σ 0.2 | t−1 | σ−1 |
| Relative machinability factor | Nominal yield strength with 0.2% loading tolerance per plastic strain value | Torsional endurance limit (symmetrical cycle) | Endurance limit in compression-tension (symmetrical cycle) |
| N | number of strain/stress cycles sustained by the object under load before fatigue failure/crack occurs |
Weldability
| No limits | Limited | Difficult to weld | |
| Heating | No | up to 100–120 °С | 200–300 °С |
| heat treatment | No | There is | annealing |
Related Products
Delivery and payment
Delivery and payment
Delivery by Nova Poshta
The speed of delivery to any branch of Nova Poshta in Ukraine is fixed by the operator, but usually does not exceed 1-3 calendar days.
In cash
Cash payment upon receipt of goods.
Cash on delivery at Nova Poshta (you must have a passport or driver's license with you).
Visa and MasterCard
Payment of the order to a Privat Bank card.
Delivery of goods is possible only after confirmation of payment.