Exclusive handmade knives No. 1 in Ukraine
Every day, 24/7
No days off
GOLDEN PHOENIX knife handmade by the master of the GARAGE ART studio, Steel N690 61 HRC
GOLDEN PHOENIX knife handmade by the master of the GARAGE ART studio, Steel N690 61 HRC
GOLDEN PHOENIX knife handmade by the master of the GARAGE ART studio, Steel N690 61 HRC
GOLDEN PHOENIX knife handmade by the master of the GARAGE ART studio, Steel N690 61 HRC
GOLDEN PHOENIX knife handmade by the master of the GARAGE ART studio, Steel N690 61 HRC
GOLDEN PHOENIX knife handmade by the master of the GARAGE ART studio, Steel N690 61 HRC
GOLDEN PHOENIX knife handmade by the master of the GARAGE ART studio, Steel N690 61 HRC
GOLDEN PHOENIX knife handmade by the master of the GARAGE ART studio, Steel N690 61 HRC
GOLDEN PHOENIX knife handmade by the master of the GARAGE ART studio, Steel N690 61 HRC

GOLDEN PHOENIX knife handmade by the master of the GARAGE ART studio, Steel N690 61 HRC

Загальна довжина клинка mm: 285±05 mm
Матеріал леза Bohler N690 martensitic, cobalt-alloyed steel, manufactured by Bohler-Uddeholm AG
Твердість клинка (метал): Hardness - 61 HRC
Матеріал руків'я: G 10, stabilized corian wood
Довжина леза 150±05 mm
  • Availability: In Stock
11,000.00 грн.
Order in 1 click
We will call you back and clarify the details
Sheath

Description

SPECIFICATIONS:

The name of the knife - GOLDEN PHOENIX knife handmade by the master of the GARAGE ART studio (Nazar Boyko), buy and order in Ukraine (Steel N690)
Knife type: Fixed blade
Brand: Studio of exclusive handmade knives GARAGE ART


Steel brand: Blade - Bohler N690 martensitic, cobalt-alloyed steel, manufactured by Bohler-Uddeholm AG
Steel sheet: One-piece cast, bolt-on installation on screed and resin
Blade Sharpening Angle: 36 Degree Pointed
Descents: Straight
Reduction: 0.3-0.4 mm
Blade hardness: 61 HRC
Total length: 285mm
Blade length: 150mm
Blade width: 40mm
Blade thickness: 4.0 mm
Handle length: 135mm
Handle thickness: 22mm
Blade Grinding: Blade finish - hand polishing and heat etching the blade
Material of bolster (guard) and back: Made of stainless steel
Spacers: G 10
Handle material: G 10, stabilized corian wood
Handle color: Brownish pink
Handle Impregnation: Yes
Sleeve Cover: Yes
Lanyard hole (for lanyard): Yes
Scabbards: 4.0 mm natural vegetable tanned leather, treated with appretura to protect against water and impregnated with protective solutions, fat wax impregnation, stitched with waxed thread. Manual embossing of the invoice. Finish with Apretura. Free suspension


Model: GOLDEN PHOENIX knife handmade by the master of the GARAGE ART studio (Nazar Boyko), buy and order in Ukraine (Steel N690)
Model number: 010
Country of birth: Ukraine
Master: Master Nazar Boyko, "GARAGE ART" knife studio, Lviv, Ukraine. Studio of exclusive handmade knives GARAGE ART
Best use: Multi-purpose: hunting, fishing, tourism, household - cutting, etc.
Knife condition: new
The price is indicated with the sheath.

 


A sharpened knife is not a cold weapon.

Our knives are very sharp, so be very careful when opening and handling them. We are not responsible for injuries caused by the use of our knives.
Our products are intended for legal use by responsible buyers only. We will not sell our products to anyone under the age of 18.

Availability changes regularly, after confirming your order we will notify you of availability or when the item is ready. The product may differ slightly from the one shown in the photo.


 

Features of steel N690

Martensitic alloy steel N690 is produced by the corporation  Vohleg-Uddeholm Gmbh & Co. , which has its enterprises in Austria, Germany, South and North America. The second name of the alloy is Austrian cobalt stainless steel. Due to its high quality and operational characteristics and advantages, it is successfully implemented in many countries of the world for the manufacture of knives and other purposes.
Steel is produced by electroslag smelting technology. It has a uniformly distributed carbide structure of the crystal lattice in the absence of harmful impurities. As a result of heat treatment and forging, the impact toughness of the material increases without loss of hardness. The presence of alloying additives in the chemical composition of steel ensures resistance to corrosion.

Field of application
Steel is recognized as a good material for the serial production of long and tactical knives, the technical characteristics of which allow operation in difficult and extreme conditions. Blades made of N690 steel are able to withstand not only longitudinal, but also strong lateral loads when acting on bends and twists.
Due to its resistance to corrosion and aggressive environments, steel is used in the manufacture of diving knives, harpoons for spearfishing and other sports equipment.
This steel is used in the manufacture of knives by such well-known European brands as Vokeg, Spyderco, Vepshmade and Echthema Ratio. The manufactured blades have excellent cutting properties, are strong, durable, sharpen well and hold an edge. The presence of alloying elements in the composition ensured high corrosion resistance while maintaining plasticity. If necessary, there is a possibility of thermal hardening up to 60 NKR.

The technical and physical characteristics of the alloy allow it to be used in mechanical engineering for the manufacture of tools, milling cutters, drills, bearing parts and critical components operating under high mechanical loads. The steel is highly wear resistant and can be heat treated.
Resistance to the effects of moisture and chemicals allows the use of steel in the food and pharmaceutical industry for the manufacture of cutting tools and grinders. At the same time, the ecological purity of the material and the complete absence of impurities are taken into account.
ANALOGUES
According to its composition, steel N690 is a close analogue of Russian steel 95X18, German X102SgMo17, Japanese / (3-10 and A115-10, French 2100СО17, American 440 С. In Sweden, an analogue of Sandvic 12С27 is produced.
STORAGE
Steel N690 contains:
■ 1.08% carbon (C), which gives the material hardness and increases strength;
■ 17.3% chromium (Cg) to obtain anti-corrosion properties, increase wear resistance and change hardening conditions;
■ 1.1% molybdenum (Mo) to reduce brittleness, increase plasticity and resistance to high temperatures;
■ 0.1% vanadium (V) to increase metal elasticity and inertness to the action of aggressive environments;
■ 1.5% cobalt (Co) increases heat resistance and improves mechanical properties;
■ 0.4% manganese (Mp) increases hardness;
■ 0.4% silicon (5|) to improve alloy stability and increase wear resistance.
The presence of cobalt in the chemical composition of the metal makes the crystal structure of N690 more uniform and resistant to mechanical loads.

PROS AND CONS OF N690 STEEL FOR KNIVES
The use of Austrian N690 steel allows the production of high-quality stainless knives for various purposes. Due to its physical and technical properties, the material is well processed, capable of heat treatment, is not prone to corrosion and is sold at an affordable price.
5*ee1 N690 is one of the best alloys for making beautiful wear-resistant blades. Simple sharpening and long-term preservation of the sharpness of the edge make use simple and convenient. You will never regret buying or making a knife from this steel.

Types of deliveries
The high quality of Wohler N690 steel is ensured by the use of a unique rolling technology developed by the manufacturer. Metal sheets are subjected to repeated hot processing with rolling in the longitudinal and transverse direction. After that, the material is cold cut into strips.
N690 steel is supplied to the rolled metal market in the form of steel strips with a thickness of 3-5 mm, a width of 20-50 mm and a length of 250 to 1000 mm, especially for the manufacture of knives. The cross-section of the strips is rectangular or with a prepared longitudinal bevel, which eliminates the need for blacksmithing when making the blade. The steel may or may not have previous heat treatment.
All of this is very convenient, as it does not require operations to cut large sheets, allows you to accurately determine the amount of required material and reduces the amount of waste.
Strips are sold individually. The price depends on the geometric dimensions of the product, thickness and types of preliminary factory processing. For the products of the metalworking industry, the supply of a sheet with a thickness of 2-8 mm of the size declared in the contract is carried out. If necessary, you can order any analogue of steels of type N690. Sheet metal is sold by weight.


Stabilized maple cap. Features of wood  

The sapwood is reddish-white, sometimes with a grayish sheen. The core is light, pink-brown in color. Without characteristic smell or taste. Annual rings are not too pronounced, but moderately small or medium in size on radial and tangential sections.

The rays are visible to the naked eye, but only so large.

 

HANDLE MATERIAL MAMMOTH TEETH

Mammoth tooth is a rare raw material that is used to make decorative objects, for example, knife handles, covers for pistol grips, and jewelry. This is a unique natural element, which is rarely obtained, so its cost is quite high.

Today, the mammoth tooth, after certain processing (stabilization), is widely used by master knifemakers. Stabilization is a process of polymerization of the material under vacuum with or without the use of fat-soluble dyes, while the material is permeated with polymeric substances through.

HANDLE MATERIAL MAMMOTH TEETH

A mammoth tooth is a product of animal origin. Its exceptional feature is the fact that its source is extinct animals - mammoths. Paleontologists found that they lived on Earth about 10 thousand years ago, and their number was very large. Mammoths' teeth were not permanent and changed about four times during their lifetime. Fallen teeth, which modern scientists find during excavations, and become the basis for decorative elements, among which there are knife handles.

Due to a long stay in the soil, the material acquired a very unstable structure - the enamel became rock-hard, and the dentin, on the contrary, became loose. But modern material stabilization technologies have helped turn mammoth teeth into an excellent basis for creating luxurious knife handles. The polymer composite provides products with resistance to corrosion and moisture, and the natural base gives a unique texture and intricate pattern.

Features of the material

Mammoth molars are used to create various products. Outwardly, they look like elephant teeth, but much more have a different shade. Taking into account the historical value and rarity, the mammoth tusk is especially highly valued, since this animal became extinct long before our era. The tusks of prehistoric giants can be found not only in paleontological museums, but also on the counters of jewelry stores, they are used to decorate the interior, they are used to create various decorative elements - of course, not in their original form, but in processed form.

According to scientists, the age of the material is 10-40 thousand years. Today, how mammoths lived is not fully understood. However, the remains of these giants found by scientists, their bones, teeth, even whole carcasses allowed scientists to seriously advance in this field of research. The available data made it possible to find out what the mammals looked like, what they ate, what climatic conditions they lived in, what behavioral characteristics they had (for example, did they lead a gregarious or solitary existence).

The mammoth ate practically the same as the modern elephant: its diet consisted of plant food. In the world, the animal could feed on coniferous plants. They preferred coarse food, which they easily chewed with their strong jaws and teeth, similar to large plates. An interesting feature of the mammoth's body was that as the old tooth wore out, a new one grew, displacing the former one and taking its place. Thus, the animal could change its teeth several times during its life. All the teeth were replaced in about a ten-year interval, and the average lifespan of a mammoth was 40 years. In other words, one animal could survive an average of four complete changes of primary teeth. Thanks to this feature, people often find individual worn mammoth teeth, but do not find other traces of it.

Appearance

If you look at a mammoth tooth, you can see a non-uniform surface with ribbed edges. Bone, enamel and soft tissue alternate in this case. The material has a rather complex structure:

its basis is dentin.

The dentine layer is covered with protective enamel.

It is worth noting that the mammoth had only 4 molars and 2 tusks, which protruded outwards and served mainly for self-defense.

After special treatment, the root tooth can be used to make various jewelry products. The density of the material is very high and resembles a stone. In order to process such a product, the craftsman needs to spend a lot of effort and time.

Stabilization of raw materials

To prevent the tooth and tusk from collapsing in the process of use and making a product from it, stabilization technology is used. This is a responsible stage of processing, in which the following technologies are used:

Polycondensation.
Vacuum processing.
Application of special dyes.

All voids of the tooth are filled with a polymer substance, due to which the base acquires reliable protection against climatic influences. Such a product does not deform, cracks do not appear on it, it becomes able to withstand high temperatures. The appearance of the material also changes, becomes more attractive and unique.
 


Before the advent of this technology, mammoth teeth and bones were rarely used for making souvenirs, because they did not have sufficient strength due to the large number of cracks and delamination inside. In addition, tooth enamel has high hardness, which during processing quickly leads to the unusability of the saw. A stabilized product is much easier to subject to further processing. Mammoth tooth became especially popular in the manufacture of knife handles. It looks unusual, attractive, and if you add a dye, you can create a unique pattern that can give even such a rare thing special individuality.


G10 — in handmade knives: quality, style, modernity

What kind of material is this?

G10 is a light and hard material characterized by a textured surface and special practicality. It is used to create handles on various types of knives - complex and integral, with additional elements.

The basis is a compound reinforced under pressure with fiberglass. The fibrous structure gives the material rigidity. In order to increase the important operational characteristics during the manufacture of handles, special strengthening chemical compounds are additionally added to the composition. The material is non-combustible, has higher strength characteristics - for bending, tearing and impact.

G10 is formed in layers. This allows you to paint the overlay in one or more colors, creating interesting visual effects of the product's multi-layering. Outwardly, it resembles  micarta  — another popular material from which RoS handmade knife covers are made

Features of the production of linings with G10

Most manufacturers subject finished G10 pads to sandblasting, which exposes the structure of the fiberglass. As a result, the handle acquires a rough surface, which prevents slipping in the hand and ensures comfortable and safe use of knives. After the finishing treatment, the surface of the pad may become dull. To restore a bright, spectacular appearance at the last stage of production, it is covered with oil or polished.

The craftsman uses G10 handle pads with various knife steels - ATS 34, CPM154CM, D2, 440C, CPM S30V, 40X13.

Advantages of the material

This modern material has the following advantages:

  • easily withstands flexibility and stretching loads;
  • has resistance to shock loads;
  • does not absorb moisture;
  • differs in high density;
  • resistant to radiation and chemicals;
  • has low electrical conductivity;
  • does not dry out and does not deform;
  • resistant to high temperatures.

Another advantage of this material is an excellent ratio of mechanical strength and light weight. This makes it possible to obtain strong linings with good operational characteristics that do not burden the knives.

High-quality and original inserts made of G10 became a wonderful decoration of exclusive and unique knives of the workshop 


High-quality and original steel inserts are a wonderful decoration of exclusive and unique knives   Studio of exclusive handmade knives GARAGE ART in Ukraine (Ukraine), which offers to order and buy in the online store https://knife.net.ua or by phone. . +380961711010

Related Products

Delivery and payment

Delivery and payment
Delivery by Nova Poshta
The speed of delivery to any branch of Nova Poshta in Ukraine is fixed by the operator, but usually does not exceed 1-3 calendar days.

In cash
Cash payment upon receipt of goods.
Cash on delivery at Nova Poshta (you must have a passport or driver's license with you).

Visa and MasterCard
Payment of the order to a Privat Bank card.
Delivery of goods is possible only after confirmation of payment.

Reviews (0)

Write a review

Note: HTML is not translated!
    Bad 
 Good