Exclusive handmade knives No. 1 in Ukraine
Every day, 24/7
No days off
RED (RED) CHEF knife handmade by master Fomenko Knifes, buy to order in Ukraine, steel - M398™ 62-63 HRC
RED (RED) CHEF knife handmade by master Fomenko Knifes, buy to order in Ukraine, steel - M398™ 62-63 HRC
RED (RED) CHEF knife handmade by master Fomenko Knifes, buy to order in Ukraine, steel - M398™ 62-63 HRC
RED (RED) CHEF knife handmade by master Fomenko Knifes, buy to order in Ukraine, steel - M398™ 62-63 HRC
RED (RED) CHEF knife handmade by master Fomenko Knifes, buy to order in Ukraine, steel - M398™ 62-63 HRC
RED (RED) CHEF knife handmade by master Fomenko Knifes, buy to order in Ukraine, steel - M398™ 62-63 HRC
RED (RED) CHEF knife handmade by master Fomenko Knifes, buy to order in Ukraine, steel - M398™ 62-63 HRC
RED (RED) CHEF knife handmade by master Fomenko Knifes, buy to order in Ukraine, steel - M398™ 62-63 HRC
RED (RED) CHEF knife handmade by master Fomenko Knifes, buy to order in Ukraine, steel - M398™ 62-63 HRC
RED (RED) CHEF knife handmade by master Fomenko Knifes, buy to order in Ukraine, steel - M398™ 62-63 HRC
RED (RED) CHEF knife handmade by master Fomenko Knifes, buy to order in Ukraine, steel - M398™ 62-63 HRC
RED (RED) CHEF knife handmade by master Fomenko Knifes, buy to order in Ukraine, steel - M398™ 62-63 HRC
RED (RED) CHEF knife handmade by master Fomenko Knifes, buy to order in Ukraine, steel - M398™ 62-63 HRC

RED (RED) CHEF knife handmade by master Fomenko Knifes, buy to order in Ukraine, steel - M398™ 62-63 HRC

Загальна довжина клинка mm: 315±05 mm
Матеріал леза Blade M398 Powder steel BOHLER M398 MICROCLEAN is a new martensitic steel from the Swedish-Austrian concern Bohler-Uddeholm by Rostyslav Dozlo
Твердість клинка (метал): Hardness - 62-63 HRC
Матеріал руків'я: Carbon, Micarta. G10 blades, ties - Corby
Довжина леза 190±05 mm
  • Availability: Під замовлення
14,000.00 грн.

Available Options

Order in 1 click
We will call you back and clarify the details
Sheath

Description

SPECIFICATIONS:

The name of the knife: RED (RED) CHEF knife handmade by master Fomenko Knifes, buy to order in Ukraine, steel - M398™ 62-63 HRC
Knife type: Fixed blade
Brand: Handmade knife workshop FOMENKO KNIFES


Availability changes regularly, when confirming your order we will inform you about the availability or the time of readiness of the product. The product may differ slightly from the one shown in the photo.

Steel grade:  Blade M398 Powder steel BOHLER M398 MICROCLEAN  is a new martensitic steel from the Swedish-Austrian concern Bohler-Uddeholm. Forging, locksmithing, MOT by  Rostyslav Dozlo
Steel sheet: One-piece, through-mounting on screed and resin 
Blade sharpening angle: Sharpened at 32-33 degrees
Bevels: Straight
Bevels:  0.1-0.2 mm
Blade hardness:  62-63 HRC
Total length:  315 mm
Blade length:  190 mm
Blade width:  40 mm
Blade thickness:  3.0 mm
Handle length: 125 mm
Handle thickness: 20 mm
Blade grinding:  Finish - machine cross satin
Bolster (guard) and back material:  Stainless steel
Handle material:  Carbon, Micarta. G10 grips, Korbi
ties Handle color: Gray
Handle impregnation:  None
Handle coating: None
Lanyard hole: None
Lanyard - None
Scabbard:  Italian genuine vegetable-tanned calfskin 4.0 mm, treated with a water-resistant finish and impregnated with protective solutions, hand-stitched with waxed thread. Hand-embossed texture. Free hanging and hanging on a belt.

Model: RED (RED) CHEF knife handmade by master Fomenko Knifes, buy to order in Ukraine, steel - M398™ 62-63 HRC
Model number: 074
Country of birth: Ukraine
Craftsman: Master Oleksandr Fomenko (Fomenko Knifes), Chuhuyiv, Ukraine Handmade knife workshop FOMENKO KNIFES
Best use: Hunting, Fishing, Tourism, Household, Carcass Splitting, Slicing, etc.
Knife condition: New
The price is indicated with the sheath.

 


A sharpened knife is not a cold weapon.


Our knives are very sharp, so open and use very carefully. We are not responsible for injuries related to the use of our knives.
Our products are intended for legal use only by responsible buyers. We will not sell our products to anyone under the age of 18.


Availability changes regularly, upon confirmation of your order, we will inform you about the availability or when the product will be ready. The product may differ slightly from the one shown in the photo.


Powder steel M398
BOHLER M398 MICROCLEAN powder steel is a new martensitic steel from the Swedish-Austrian concern Bohler-Uddeholm, which was developed and launched in 2019. The increased content of Chromium provides it with good corrosion resistance, and the increased content of Vanadium provides the steel with extremely high wear resistance. The Carbon content has increased by 30% compared to its predecessor M390 steel and added to its hardness, which is 63-64 units on the Rockwell scale. To date, M398 steel is considered one of the best powdered stainless steels, which speaks for itself not only in its characteristics, but also in its price, which is quite high. Accordingly, be prepared for the fact that the cost of the finished knife cannot be low.

Powder steel M398 is produced in accordance with European standards and has the following chemical composition and microstructure (we will consider in comparison with the predecessor steel grade M390):

  • Carbon (C, Carbon): is one of the main parts of the steelmaking process, improves edge retention and increases toughness; increases hardness and wear resistance.
  • Silicon (Si, Silicon) and Manganese (Mn, Manganese): used as standard deoxidizers and degasifiers to remove oxygen during metal melting, increase strength.
  • Chromium (Cr, Chromium): increases corrosion resistance (at >11% it makes the alloy stainless), enhances hardness and density.
  • Molybdenum (Mo, Molybdenum): increases hardness, strength, hardenability and density; improves machinability and corrosion resistance.
  • Vanadium (V, Vanadium): increases strength, wear resistance, increases density and viscosity; increases corrosion resistance by increasing the oxide film; vanadium carbide inclusions are very hard. The presence of this metal in steel indicates its quality.
  • Tungsten (W, Tungsten): is the most refractory metal of all, used to add strength and toughness, improve hardenability; retains hardness at high temperatures.

Due to the higher amount of primary carbides in M398 steel (about 30 vol.%), the hardness, wear resistance and compressive strength in M398 increase significantly.

Also, steel M 398 is characterized by the following properties:

  • - high level of corrosion resistance;
  • - high strength;
  • - extremely high wear resistance;
  • - high stability during heat treatment;
  • - good grindability;
  • - good polishability;
  • - high hardenability and compressive strength.

Thus, the knives made of M398 powder steel, the exclusive knife.net.ua manual robotic knives, are highly durable and can withstand fairly large loads and at the same time maintain their sharpness perfectly. They have excellent anti-corrosion properties and do not react with most alkalis and acids, that is, these knives do not require special care, which makes them a huge plus when used in nature, hunting, fishing and / or in extreme conditions *. Perhaps the only disadvantage of knives made of M398 steel is their cost, which is quite high and one must be prepared for this.

It is worth remembering that if you use the knife for its intended purpose and handle it with care, the knife will serve you for a very, very long time.

Well, you can buy a knife made of powder steel M398 on our website knife.net.ua or by contacting us by phone +380961711010

Knife steel Powder steel M398

 


Well, you can buy a knife made of Knife steel CPM-S90V. Composition and properties. on our website knife.net.ua or by contacting us by phone +380674072030

It is worth remembering that when using a knife for its intended purpose and with careful handling, the knife will serve you for a very, very long time.

 


WHAT ARE MICARTA AND G10, AND HOW DO THESE COMPOSITE MATERIALS DIFFER FROM EACH OTHER?

For decades, Micarta and G10 composite materials have been the undisputed leaders in the knife industry, in particular for the production of handles of various complexity. The materials stand out for their availability, ease of production and processing, as well as high strength, wear resistance and unpretentiousness in maintenance. Both materials are composite, their basis is a polymer resin, which is supplemented with layers of captive fabric of various types.

Micarta-G10-Сomposite-materials-photo-2

Micarta material is an electrically insulating material consisting of a polymer film (based on cresolaldehyde, phenolaldehyde, xylenolaldehyde resin, or resin from a mixture of phenolic raw materials). It is glued using various electrically insulating papers, fabric (mainly flax of natural or artificial origin), or other materials of similar structure, there are also options made of fiberglass and carbon fiber. The color of the material depends on the resin and fabric base used in the gluing. Micarta is a relatively soft material and requires careful manual processing. Therefore, it is used in the production of handles for more expensive knives.

Micarta is registered as a trademark of the American company Industrial Laminates / Norplex, Inc. (Norplex-Micarta). Its domestic analogue can be considered a material called "Getinax", which is mainly used as a base for printed circuit boards. The material also has a sheet-like pressed structure, which consists of a paper base with the addition of impregnation from phenol-aldehyde or epoxy resin.


Linen-based micarta has a more attractive optical effect when the fibers are sanded. After sanding, the surface can be polished or sandblasted. In the first version, the surface of the material will be smooth, silky, warm and pleasant to the touch. In the second, the material becomes rough and has a matte finish, in addition, it holds securely in the hand and does not slip.

Key features of Micarta:

  • increased water resistance;
  • excellent resistance to temperature changes;
  • strength to mechanical processing;
  • dense structure that does not absorb odors;
  • the microrelief of the material does not slip in the hand even on a wet surface;
  • a tight fit to the blade, which leaves no gaps at all and prevents food residues and harmful microorganisms from accumulating.

G10 is a lightweight, hard and fairly rigid composite material with a textured surface, which is mainly used in the manufacture of handles of both folding pocket knives and fixed blade knives. This material is created by placing several layers of fiberglass, thoroughly impregnated with epoxy resin, in a special vacuum press, where, under the influence of compression and heat, the resin finally hardens, preserving the structure of the fiberglass.

G10 material is characterized by good impact resistance, wear resistance, moisture resistance, as well as ease of processing and maintenance. The material can be painted in various colors, including layers. The surface of G10 can also be polished to a glossy state, or have a rough anti-slip structure, under the influence of a grinding machine, or sandblasting.

Key features of G10:

  • high stability of basic properties during temperature fluctuations;
  • withstands high impact loads, compressive and tensile loads;
  • high overall hydrophobicity and resistance to chemicals;
  • weighs relatively little, in relation to the overall strength and density;
  • low electrical conductivity;
  • can take different forms.

Composite materials G10 and Micarta have almost the same composition and external similarity. At the same time, G10 material has higher fire resistance, although it is not a non-combustible material, has higher compressive, bending, impact and tear strength, and is also simpler and more budgetary in production. At the same time, G10 is inferior in terms of "tack" in wet conditions, and also, tactilely, feels less "natural".


High-quality and original steel overlays are a wonderful decoration of exclusive and unique knives from the workshop  Handmade Knife Workshop FOMENKO KNIFES  (Ukraine), which offers to order and buy online store https://knife.net.ua or order by phone +380674072030

 

Related Products

Delivery and payment

Delivery and payment
Delivery by Nova Poshta
The speed of delivery to any branch of Nova Poshta in Ukraine is fixed by the operator, but usually does not exceed 1-3 calendar days.

In cash
Cash payment upon receipt of goods.
Cash on delivery at Nova Poshta (you must have a passport or driver's license with you).

Visa and MasterCard
Payment of the order to a Privat Bank card.
Delivery of goods is possible only after confirmation of payment.

Reviews (0)

Write a review

Note: HTML is not translated!
    Bad 
 Good