SHERSHEN II knife, handmade by studio master PAVL GONCHARENKA, buy to order in Ukraine, steel - DI69-MP, in a laminate of stainless steel n690, through two layers of brass and copper, 63 HRC
- Brand: Майстерня ножів ручної роботи Павла Гончаренка
- Product Code: ШЕРШЕНЬ ІІ - ніж ручна робота майстра студії Павла Гончаре
Загальна довжина клинка mm: | 268±05 мм |
Матеріал леза | Blade steel - DI69-MP laminate in stainless damask. Blade after TCO + cryo |
Твердість клинка (метал): | Загартованість - 63 HRC |
Матеріал руків'я: | Asian water buffalo horn, brass, neuselber, amber in acrylic, stabilized mammoth tooth, stabilized moraine hornbeam, mosaic foam, and rope tube. Strap made of leather cord 3 mm, beads made of amber in acrylic. |
Довжина леза | 138±05 мм |
- Availability: Під замовлення
Available Options
Description
SPECIFICATIONS:
Brand: Studio "Handmade knives by Pavlo Honcharenko"
Steel sheet: One-piece, forged, assembly of the handle is mounted on epoxy glue
Descents: Straight
Taper: 0.2mm
Blade Sharpening Angle: Sharpened at an angle of 36 degrees
Blade hardness: 63 HRC cutting edge hardness
Total length: 268 mm
Blade length: 138mm
Blade width: 33.0 mm
Blade thickness: 4.0mm
Handle length: 130 mm
Handle thickness: 25mm
Blade Grinding: Mirror ground
Bolster material (guard and butt): Asian water buffalo horn
Handle: Asian water buffalo horn, brass, neuselber, amber in acrylic, stabilized mammoth tooth, stabilized moraine hornbeam, mosaic foam, and rope tube. Strap made of leather cord 3 mm, beads made of amber in acrylic.
Handle color: Dark brown
Handle Impregnation: Yes
Handle Cover: Yes
Lace hole (for lanyard): Yes
Lanyard: Strap made of leather cord 3mm, beads made of amber in acrylic.
Scabbards: Cap of olive, Italian genuine vegetable-tanned calf leather, treated with water-resistant finish and impregnated with protective solutions, hand-stitched with waxed thread.Hand carved wood and artistic painting, wooden insert in the middle.The suspension is removable, the insert is a hornet in acrylic.
Country of birth: Ukraine
Craftsman: Master Pavlo Goncharenko, Ivankiv, Ukraine ( "Handmade knives by Pavlo Honcharenko" )
Best use: Multi-purpose - hunting, fishing, tourism, household, carcass splitting, slicing, etc.
Knife condition: New
The price is indicated together with the scabbard.
A sharpened knife is not a cold weapon.
Our knives are very sharp, so open and use very carefully. We are not responsible for injuries related to the use of our knives.
Our products are intended for legal use only by responsible buyers. We will not sell our products to anyone under the age of 18.
Availability changes regularly, upon confirmation of your order, we will inform you about the availability or when the product will be ready. The product may differ slightly from the one shown in the photo.
Steel DI90-MP. Composition and properties.
Steel grade DI90-MP (17X5V3MF5S2-MP) - tool alloyed powder steel from the Ukrainian enterprise Dneprospetsstal (Zaporozhye). If we give a decoding of the name itself, then D is the manufacturer, I is research, MP is powder metallurgy. The main purpose of Art. DI90-MP: production of dies and punches for stamping equipment, heavily loaded elements of cold-forming dies operating in conditions of increased wear. The hardness of DI90-MP is 61-62 HRC, the secondary hardness is 63-65HRC. Requires attention in heat treatment. The microstructure is homogeneous, with highly hard chromium and vanadium carbides. Steel is considered a very good steel for the manufacture of designer knives and blades: good wear resistance and impact strength (decreases after secondary hardening), keeps sharpening very well.
Judging by the official website of the manufacturer, at the moment this steel is not manufactured. Perhaps that is why, small batches of it periodically appearing on sale have a very high price.
Similar analogs: -
Steel composition DI90-MP (17Kh5V3MF5S2-MP), % | |||||||||
---|---|---|---|---|---|---|---|---|---|
C | Cr | Mn | Mo | Ni | P | Si | S | V | Other |
1.6-1.75 | 5.7 | 0.6 | 0.3-0.6 | - | 0.015 | 2.1 | 0.015 | 4.8-5.5 | 2.8-3.5(W) to 1.0(Co) |
maple burl
A cap is a growth on a tree trunk, it has a much denser structure with a completely unique cut pattern.
The cap has high strength, the wood of the cap does not burn well, is well processed and polished.
The dimensions of the blanks are approximately 135-45-30 mm.
Bars of stabilized wood are great for creating standard through-mount and countersunk knife handles.
Also, stabilized maple sap is excellent for carving, creating miniatures, jewelry, as well as various pendants, amulets, toys and crafts.
It is convenient to work with a stabilized maple cap for both experienced craftsmen and beginners.
Stabilized wood of any color is straight, even bars of real wood - kapa maple impregnated with a special composition.
The wood stabilizer completely fills all small pores, thanks to which all the air and moisture come out of the wood, turning it into a polymerized bar of stabilized Karelian birch, only with improved properties.
Stabilized wood is many times heavier and much denser. It is not exposed to moisture, does not change its color under sunlight, remaining a much stronger and more reliable material.
All this makes stabilization an ideal material for creating objects that are exposed to all physical and climatic stresses - knife handles, cutters and various tools.
Stabilized maple sap is perfectly sanded, giving a surface as smooth as glass or stone. Without a coating in dry form, the stabilized bars have a faded appearance, but under the finishing compositions their bright deep texture is revealed.
For its unique beauty, the cap is called wooden malachite!
In general, the smaller the pattern and the larger the size of the cap, the more expensive it is.
The value of this unique material is told by a historical fact given in the book "Kapova Skrynka" (author Nadiya Perminova): "... in 1837, up to fifty rubles were paid for a cap growth of twenty pounds (a little more than 8 kg) ... the same amount was estimated thoroughbred bull at an agricultural exhibition.
Today, on the world market, the price of veneered wood (solid and veneer) is many times higher than the price of any other, including: oak, elm, walnut, mahogany and any exotic species.
The unique combination of material properties, limited stocks and the uniqueness of the cap pattern in each product ultimately determined the universally recognized, high aesthetic value and corresponding consumer price of products made of this wood, which is used in the decoration of the most luxurious interiors.
What is a sea hornbeam. Deciduous hornbeam tree and its unusual properties
- Description
- Wood characteristic
- black hornbeam
Before using any type of fastener, pre-drilling of the material is required. It holds screws and nails very well, which is well suited for securing furniture joints and intricate details.
When using fresh wood in everyday life, it is recommended to cut and grind the products until the material is dry - in this form it is easier to process it.
Despite the natural high density and wear resistance, the hornbeam is considered a rather complex and unpractical breed, as it quickly soaks, is prone to fungus and other biological pathogens. Without additional etching and finishing, it is not used, and is not suitable for external work. The crimped structure of the fibers and the low gluing ability do not allow the use of the hornbeam as a structural building material : plywood or glued beams. It is not used for outdoor work. Indoors, the surface of the hornbeam should be covered with protective impregnations and thick layers of varnish. Do not use the material in rooms with high humidity.
Areas and features of application
This wood finds its purpose where resistance to shock loads is needed: in the manufacture of decorative elements, parts of mechanisms, sports items. It is produced from:
- golf clubs, billiard cues;
- weaving shuttles;
- agricultural tools;
- cases and elements of necks of violins, guitars, details of grand pianos, other musical instruments;
- cutting boards, knife handles;
- caskets, toys, souvenirs, frames for paintings, panels and photographs;
- furniture, parquet, interior design details.
Due to its noble light pearl color and strength, hornbeam wood has a high artistic value and is used in creating mosaic patterns, friezes and decorative elements.
Hornbeam is used to produce parts for propellers in aircraft construction.
On average, the price per 1 m³ of wood, depending on the manufacturer, is 40,000–46,000 rubles.
It is believed that furniture or decoration made from this type of wood relieves fatigue, gives physical strength, helps to coordinate thoughts and actions, and get rid of a bad mood.
black hornbeam
The light structure of wood with a slight natural pattern makes it attractive for the manufacture of various imitations. By etching the material, a black hornbeam is obtained, which, in terms of properties and appearance similar to ebony. For high-quality staining, nigrosines are used - special mixtures based on aniline, nitrobenzene and hydrochloric acid, dissolved in water or alcohols. They give the material a pure bright color that is not afraid of exposure to direct sunlight. Professional etching involves painting through the entire thickness of the material, and not surface application of paint. It is not recommended to pickle wood on your own, since when using self-made chemical dyes, it can lose strength, become loose or unevenly stained. Masterfully made, ebony-imitated black hornbeam has a very dark purple hue that does not fade and does not shed over time, does not get dirty when mechanically applied to the surface. Black hornbeam is sold in small quantities in the form of small bars.
Related Products
Delivery and payment
Delivery and payment
Delivery by Nova Poshta
The speed of delivery to any branch of Nova Poshta in Ukraine is fixed by the operator, but usually does not exceed 1-3 calendar days.
In cash
Cash payment upon receipt of goods.
Cash on delivery at Nova Poshta (you must have a passport or driver's license with you).
Visa and MasterCard
Payment of the order to a Privat Bank card.
Delivery of goods is possible only after confirmation of payment.