NOBLE knife handmade by studio master Pavlo Honcharenko, order to buy in Ukraine (Steel - s390)
- Brand: Майстерня ножів ручної роботи Павла Гончаренка
- Product Code: ШЛЯХЕТНИЙ - ніж ручної роботи майстра Павла Гончаренка
| Загальна довжина клинка mm: | 275±05 мм |
| Матеріал леза | S390 MICROCLEAN powder steel blade (this is a powder metallurgical high-speed cutting steel of the third generation) in a stainless steel laminate 95x18 |
| Твердість клинка (метал): | Загартованість - 66 HRC |
| Матеріал руків'я: | Asian water buffalo horn, stabilized mammoth tooth, neuselber, g10, hybrid of stabilized maple and acrylic cap, mosaic tail tube. Strap made of leather cord 3 mm, bead made of hybrid |
| Довжина леза | 145±05 мм |
- Availability: In Stock
Description
SPECIFICATIONS:
The name of the knife - NOBLE knife handmade by studio master Pavlo Honcharenko, order to buy in Ukraine (Steel - s390)
Knife type: Fixed blade
Brand: Pavlo Honcharenko's Handmade Knives Studio
Blade material: Blade made of powder steel S390 MICROCLEAN (powder metallurgical high-speed cutting steel of the third generation) in a laminate of stainless steel 95x18
Steel sheet: One piece, full length of the knife
Blade hardness: 65 HRC
Overall length: 275 mm
Blade length: 145 mm
Blade width: 32 mm
Blade thickness: 3.8 mm
Reduction: 0.2 mm
Handle length: 130 mm
Handle thickness: 30 mm
Grinding of the blade: Finish - manual satin 600 grit
Bolster Material: Asian Water Buffalo Horn
Handle: Asian water buffalo horn, stabilized mammoth tooth, neuselber, g10, stabilized maple/acrylic kapa hybrid, mosaic binding tube. Strap made of leather cord 3 mm, bead made of hybrid
Handle color: Black-blue
Impregnation of the handle: Yes
Handle cover: Yes
Hole for a shoelace (for a lanyard): Yes
Temlyak: Temlyak, Cheprak calfskin, hand-stitched with waxed thread. Strap made of leather cord 3 mm, bead made of hybrid.
Scabbards: Maple top, chamois calf leather, Italian vegetable tanned genuine leather, finished with a water-resistant finish and impregnated with protective solutions, hand-stitched with waxed thread. Manual embossing of the invoice. Free suspension, removable. Insert and beads from hybrid
Model: NOBLE knife handmade by studio master Pavlo Honcharenko, order to buy in Ukraine (Steel - s390)
Model number: 062
Country of birth: Ukraine
Craftsman: Master Pavlo Honcharenko, Ivankiv, Ukraine (Pavlo Honcharenko's Handmade Knives Studio)
Best use: Hunting, cutting, cutting
Knife condition: new
The price is indicated together with the scabbard.
A sharpened knife is not a cold weapon.
Our knives are very sharp, so be very careful when opening and handling them. We are not responsible for any injuries resulting from the use of our knives.
Our products are intended for legal use only by responsible buyers. We will not sell our products to anyone under the age of 18.
Availability changes regularly, after confirming your order we will notify you of availability or when the item is ready. The product may differ slightly from the one shown in the photo.
Powder steel S390 MICROCLEAN
Powder steel S390 MICROCLEAN is a powder metallurgical high-speed steel of the third generation, which is made from exceptionally clean finely dispersed powder produced at a modern plant for the production of high-quality powder steels BÖHLER in Kapfenberg, Austria.
This alloy is expensive, belongs to the premium class with high hardness and complex mechanical and heat treatment. As a result, its hardness can reach up to 67-70 units according to Rockwell, which is distinguished by an aggressive cut and high operational characteristics.
Powder steel S390 is widely used for the production of high-performance tools (for example, in the automotive industry - clutches, camshaft flywheels; in metal cutting - drilling, thread cutting, gear cutting tools, broaching and broaching, end mills, saws; in cold metal working - various types of spindles thread knurling tools, etc.), i.e., where the high precision of the components is important, as well as the stability and duration of its use, therefore, the composition contains many alloying elements, the action of which is aimed at preserving the properties of steel in any conditions.
Also, S390 steel has proven itself in knife production, although not so long ago. From S390 steel, you can buy high-quality and reliable working and hunting knives of medium and small size, which will show themselves perfectly in cutting strong materials, for example, tendons and skins when processing game. Similar characteristics will be relevant for professional kitchen knives.
The production process of powder steel S390 MICROCLEAN looks like this:
The chemical composition of S390 MICROCLEAN steel is as follows:
- Carbon (C) is responsible for strength after heat treatment, i.e. provides hardness and strength;
- Chromium (Cr) - increases the hardening ability of steel, has a positive effect on corrosion resistance. In this alloy, the chromium content is small, so the knife blade requires care to protect it from rust. Chromium also increases wear resistance;
- Molybdenum (Mo) - allows you to increase the melting point, therefore, and preserve the quality of the blade at elevated temperatures. At the same time, the sword does not become fragile and fragile, with increased hardness - the steel becomes more elastic, resistance to chemical aggressive substances increases;
- Vanadium (V) – its presence indicates an increase in elasticity, wear resistance, and also provides inertness to chemical influences;
- Tungsten (W) – the high melting point of tungsten increases the stability of steel at high temperatures. It is the main alloying element of high-speed cutters;
- Cobalt (Co) is an expensive alloying additive that has a positive effect on heat resistance, also increases the hardness and wear resistance of the metal, while these parameters are preserved at high temperatures and mechanical loads.
Thus, the advantages became as follows:
- high red resistance, the steel behaves well during tempering, while it works without problems even at low temperatures;
- very high wear resistance;
- excellent compressive strength;
- high viscosity; impact properties;
- knives made of S390 steel have good machinability indicators, for example, grinding;
- good fatigue properties.
There are fewer disadvantages, but they are still there:
- corrosion resistance is not at the highest level, so the knife needs additional care, albeit minimal - wipe with petroleum jelly, which is sold in any pharmacy;
- high price due to the complexity of steel production.
A knife made of powder steel S390 Microclean is certainly not a cheap pleasure, but it is worth it and will be useful both for professional activities and for active hobbies, whether it is hunting, fishing, tourism or cooking.
*It should be remembered that if the knife is used for its intended purpose and with careful handling, the knife will serve you for a very, very long time.
Well, you can buy a Damascus steel knife on the portal https://knife.net.ua/ on our website or by contacting us by phone +380961711010.
Happy shopping! We will be glad to see you among our customers!
A maple burl is a spherical outgrowth cut from a tree, which occurs due to the fouling of wood and bark at the bends of the trunk or branch, where the bud that has not blossomed was located. This happens both on fairly young and old trees, but, as a rule, they cut off a large formation from which something can be made. A cap can appear on the trunk or near the root: if the first is rarely more than 30 cm in diameter, then the second can grow up to a meter, it is usually underground. Education can have a different shape, for example, round or encircling.
The material is valuable not only for its special strength, which is higher even in comparison with samples of the same wood, but taken from another place in the plant, but also for the special structure of the fibers. If such an outgrowth is cut, you can notice an unusual pattern that is unusual for a tree trunk. In appearance, it resembles marble: this is due to the fact that the fibers cannot develop in the normal order, as they are forced to bypass the object that interferes with them.
Using a burl
Even in ancient times, the burl was popular for making the following items:
Souvenirs (snuff boxes, caskets).
· Utensils.
· Handles for weapons.
· A variety of items needed in everyday life.
· Details of furniture, most often decorative elements.
The cost of such products was much higher than usual, since it is difficult to process the build-up. Modern technology has stepped far ahead, so a stabilized maple burl appeared . This is a special material that differs from ordinary wood not only in its attractive appearance and unusual colors, but also in completely different characteristics that make it many times better.
Stabilization is a kind of preservation of wood with the help of special polymers. Added dyes allow you to change the appearance beyond recognition, as they color the pores from the inside, and the polymer fills them, clogging the material from air and moisture, which makes it more durable and strong. The natural texture of wood will become even more pronounced, you can choose any color, create an unusual composition from the finished material.
How is stabilized wood used?
Maple burl stabilizer has a wide range of applications. Despite the water resistance, strength and durability, this material is not used for construction due to the small size of finished products and their high price. But it is suitable for the following tasks:
Making knife handles
Production of decorative elements, for example, decorations in the interior or furniture fittings: handles, inserts, shelves.
Production of jewelry, caskets, other souvenirs due to their attractive appearance.
Preserved maple is very pleasant to the touch and does not need any further processing such as varnishing or staining. Due to the fact that the structure of the cap is impregnated with polymers and dyes through and through, its appearance does not change over time. Colors do not fade, there is no abrasion of the material. Products from it can be washed, subjected to slight mechanical stress.
MAMMOTH TEETH HANDLE MATERIAL Mammoth tooth.
A mammoth tooth is a product of animal origin. Its exceptional feature is the fact that its source is extinct animals - mammoths. Paleontologists found that they lived on Earth about 10 thousand years ago, and their number was very large. The teeth of mammoths were not permanent and changed about four times during their lifetime. Fallen teeth, which modern scientists find during excavations, and become the basis for decorative elements, among which there are knife handles.
Due to a long stay in the soil, the material acquired a very unstable structure - the enamel became rock-hard, and the dentin, on the contrary, became loose. But modern material stabilization technologies have helped turn mammoth teeth into an excellent basis for creating luxurious knife handles. The polymer composite provides products with resistance to corrosion and moisture, and the natural base gives a unique texture and intricate pattern.
Related Products
